PrimoChill Ice - Low-Conductive Coolant (32 oz.)

Description

PrimoChill takes pride in providing solutions, and PC Ice is the solution to your water cooling fluid dilemma. This revolutionary cooling formulation takes a giant step in the world of water cooling-leaving the competition in a puddle of their own sweat. PC Ice is intended for the casual user looking to get into water cooling without worrying about their system springing a detrimental leak*. Its clean, low viscosity and low chemical makeup creates an excellent coolant for your PC. If you are looking for an affordable and efficient solution as well as a peace of mind, the ONLY solution is PC Ice. The name hasn't changed, the performance is still top notch, the cost is still outstanding, leaving PC Ice ounce for ounce STILL your best choice.
Features
Repeatable chemistry for Identical colors every time.
Designed for users to fill it and forget it.
Pre-measured and pre-dyed. Ready to add to your system.
Cleanest coolant formulation in the water cooling industry.
Preservative and APE free.
Special inhibiting ingredients that prevent sludge build up of algae and galvanic corrosion.
Specifications
Bottle Size: 32 fluid ounces
Shelf Life: 2 years (unopened)
Mix Ratio: Use as Bottled
Compatibility
We highly recommend visiting the manufacturer's website for a complete list.
Additives / Fluids: PC ICE only
Do not mix ANY additional additives, coolants or silver coils with ICE. This will change the formulation of ICE causing undesirable results.
Safe to use with all rubber gaskets, acrylic tubing, pvc tubing, petg tubing, glass tubing, as well as nickel and copper components.
Parts Included
1x 32oz Bottle PrimoChill ICE
Warnings
Low-Conductivity
As with all Low-Conductive fluids, PC ICE can become conductive if it comes in contact with excessive dust or other fluids that may be conductive. The Low-Conductive aspect of PC Ice is used as a safety measure only. It is always a good idea to keep your system clean and free of dust, especially in a water cooled system. Recommend: Pre-treat your system with Sys Prep (sold separately) to achieve a clean loop and to ensure optimal non-conductive results.
Maintenance
As with all custom loop water-cooling, continual maintenance and frequent inspection is required. ICE will need to be replaced every 6 months, depending on the complexity and conditions of your loop this time frame may vary.
Compatibility
Use of this product with aluminum components (such as aluminum constructed radiators) is STRONGLY DISCOURAGED and will void the fluid warranty. PrimoChill will not support or replace fluids used with an aluminum radiator.
Do not mix ANY additional additives, coolants or silver coils with ICE. This will change the formulation of ICE which can cause the fluid to solidify or break apart.
Known incompatible radiators include but NOT limited to:
TT RL Series - Radiators
EK Aluminum Kits
Staining
The use of any colored fluids/dyes WILL ABSOLUTELY stain your components in your cooling loop including rigid and flexible tubing, acrylic reservoirs, and blocks. Prolonged use will cause permanent staining of your components. Severity of staining will be based on the color. Use of this product is at your own risk. PrimoChill will not replace stained components.
High Pressure Systems
The combination of high pressure loops and micro-channel water blocks will accelerate the breakdown of ICE coolant. We STRONGLY recommend using a pressure relief valve (sold separately) in every water-cooling loop.
Not responsible for any hardware damage. Use at your own risk.